Icon

CTC EcoPart 600M

Compact pump for geothermal, marine or ground source heat suitable for low ceilings where the heat pump will be located. Or if you want to connect the pump to a wood burner or other units. EcoPart has neither hot water preparation nor built-in control, which makes it easy to simply replace the geothermal heat pump.

CTC EcoPart 600M adapts automatically to the building’s output requirements during the year. When high output is required, the output increases. When less output is required, the compressor shifts to lower output. This means that you will always achieve maximum savings.

CTC EcoPart  600M is a compact heat pump with same level of performance as CTC GSi 12 and 16, but without control and water heating. CTC EcoPart 600M comes in two models, which means it can be used in most properties: 612M with an output range of 2.5-12 kW and 616M with 4-16 kW.
CTC EcoPart is flexible and is designed to be connected to new or existing systems. And it’s no problem if you have an old heat pump that needs to be replaced, since the product automatically adapts to the existing borehole. Ground, bedrock and lakes are used as heat sources. The brine system can easily be connected to the right, left, top or rear of the heat pump.

If your ceiling is too low for a normal heat pump, or if you need very large volumes of hot water and heating, the perfect solution is to install CTC EcoPart 600M together with the CTC EcoZenith i550 Pro indoor module. This combination will give you a complete heat pump system with control and hot water heating and with a capacity of more than 600 litres of 40 °C hot water. Plus, the system can be expanded with pool and solar heating.

If you would like to connect CTC EcoPart 600M to your existing installation, just add the CTC EcoLogic Pro/Family control module. For particularly large energy requirements, up to ten heat pumps can be run together.

Highest energy class A+++
Compact, ultra-efficient, and speed-controlled
Up to ten heat pumps can be run together
Available in two sizes: 12-16 kW
Perfect for spaces with low ceiling heights
65 °C primary flow temperature
Model designation Item no.
CTC EcoPart 612M 588600001
CTC EcoPart 616M 588600002
CTC EcoComfort
Item no.: 585920001

CTC EcoComfort

A passive cooling unit that uses the borehole's cool temperature.

CTC Förhöjningssockel II
Item no.: 589590301

CTC Förhöjningssockel II

168 mm. For more space under the heat pump. GSi/GS600, EH400 from 731020391468, EcoPart from 730120390473.

CTC Raised Base 168 mm
Item no.: 586500301

CTC Raised Base 168 mm

Base 168 mm, white lacquered. Mounted under the heat pump for more space under the product.

CTC Safety pressure switch
Item no.: 589597301

CTC Safety pressure switch

Provides a warning in the event of low brine pressure.

Communication cable 10 m
Item no.: 586041401

Communication cable 10 m

For when the control unit and heat pump are far apart (more than 5m).

Recommended approximate prices in SEK incl. VAT

All accessories
CTC EcoPart 600M Manual
CTC EcoPart 600M Product sheet

How much you save with a heat pump!